Customization: | Available |
---|---|
After-sales Service: | Technical Support |
Warranty: | 1 Year |
Still deciding? Get samples of US$ 135/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Features
2-electrode measurement method ;
Two 4-20mA current output;
Two SPST relays;
An RS485 interface, supports Modbus;
Applied to various conductivity monitoring and control occasions.
Specification
Model | AEC1-T2 | |
Display range | Conductivity | 0.00~20.00 mS/cm, full range automatic switching |
Resistivity | 0.00~18.00MΩ.cm | |
TDS | 0.00~10g/L | |
Temp | -10~150ºC | |
Resolution | Conductivity | 0.001µS /cm |
Resistivity | 0.01MΩ.cm | |
TDS | 0.01mg/L | |
Temp | 0.1ºC | |
Relay control | 2 settable SPST relays with a maximum load of 3A/250VAC | |
Accuracy | 1% of the measuring range | |
Analog current output | 2 settable 0/4~20mA active current loop output, maximum load 1000Ω | |
Communication method | Two-wire RS485 interface; MODBUS RTU | |
Display screen | 128*64 LCD, adjustable backlight mode, adjustable display rate | |
Operating environment | 0~60ºC, relative humidity less than 95% RH( no condensation) | |
Shell material | Enhanced ABS protection grade IP66 | |
Dimension | 100*100*120 mm | |
Mounting method | panel installation (hole size 92*92 mm) | |
Power supply | 18~36VDC or 100~240V AC 50/60Hz |