Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Still deciding? Get samples of US$ 190/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.Differential signal PH/ORP online controller.
2.Support a variety of installation methods.
3.Clock and historical data recording function.
4.Two settable SPST multifunctional relays.
5.Two high-precision 0/4~20mA current output.
6.A two-wire RS485 interface, Modbus RTU protocol.
7.The meter can perform temperature compensation.
Model | APX2-G4 | |
Principle | PH | Glass pH electrode (hydrogen ion concentration index) |
ORP | Platinum or gold electrodes(redox potential) | |
Display Range | PH | 0~14pH |
ORP | ±2000mV | |
Temp | -10~150ºC | |
Solution Ground | differential ground | |
Resolution | pH:0.01pH ORP: 1mV TEMP:0.1ºC | |
Accuracy | 0.1% of the measuring range or ±0.02pH/ ±2mV, take the larger one | |
Stability | 0.05% of measuring range every 24 hours without accumulation | |
Repeatability | Better than 0.1% of measuring range | |
Temp.Compensation | Automatic or manual(NTC10K/PT1000) Converted at 25°C |
|
Relay Output | Two SPST relays. Max. load 3A/250VAC,set high/low alarm, temp. or clean control | |
Digital Communication | Atwo-wire RS485,Modbus,JSON | |
Current Output | Two 0/4~20mA currentMax.load 1000Ω | |
Language | English and Chinese | |
Time Display | Year/month/date hour/minute/second | |
Historical Data | 10000 historical data can be recorded, Record the last 100 calibration maintenance data |
|
Display | 128*64 3.2-inch graphic dot matrix LCD | |
Calibration Method | PH: 3 points; ORP:2 points PH: 5 points multi-slope calibration |
|
Protection Grade | IP66 | |
Enclosure Material | Enhanced ABS | |
Power Supply | AC:100~240V 50/60Hz or DC:18~36V | |
Dimension | 144*144*120mm (Hole size 138*138mm) | |
Electrical Interface | Reserve three M12*1.5 gland heads, the wire diameter is 3~6.5mm | |
Work Temperature | 0~60ºC,RH<95%,non-condensing | |
Storage Temperature | -20~70ºC,RH<55%,non-condensing | |
Installation | Wall mounting,pipe clamp, panel | |
Power Consumption | Max.3W |