| Customization: | Available |
|---|---|
| After-sales Service: | Technical Support |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 99/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.2-electrode measurement method, it can be used with our stainless steel conductivity sensor with different K constant.
2.Two SPST relays for control;
3.Two 4-20mA current output;
4.Applied to various conductivity monitoring and control occasions.
5.The conductivity controller can not only display the conductivity value but also display the TDS, resistivity, salinity value.
| Model | AEC1-T1 | |
| Principle | Two-electrode | |
| Display Range | Conductivity | 0.00~20.00 mS/cm |
| Resistivity | 0.002.cm~18.00MΩ.cm | |
| TDS | 0.00~10g/L | |
| Salinity | 15ppt | |
| Temp. | -10~150ºC | |
| Resolution | EC: 0.001μS /cm Resistivity:0.01MΩ.cm TDS:0.01mg/LSalinity:0.01% Temp.:0.1ºC |
|
| Accuracy | EC: ±1% FS Temp.:0.5ºC | |
| Repeatability | ±0.3% FS | |
| Temp.Compensation | Automatic or manual(NTC10K or PT1000) | |
| Relay Output | Two SPST relays, maximum load 3A/250VAC Set high/low alarm, temperature and wash control |
|
| Communication | N/A | |
| Signal Output | Two 0/4~20mA current, Max.load 1000Ω | |
| Configuration | Power failure protection, indefinite retention of parameters | |
| Language | English | |
| Display | 128*64 3.2-inch large graphic dot matrix LCD | |
| Protection Grade | IP66 | |
| Enclosure Material | Enhanced ABS | |
| Power Supply | AC:100~240V 50/60Hz or DC: 18~36V | |
| Dimension | 100*100*120mm (hole size 92*92mm) | |
| Work Temperature | 0~60ºC, RH<95%,non-condensing | |
| Storage Temperature | -20~70ºC,RH<55%, non-condensing | |
| Installation Method | Panel | |
| Power Consumption | 3W | |
){kind=link}