| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 223/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Universal controller specially designed for DRFN digital series COD sensors, compatible with all DRFN digital COD sensors.
The connected sensor uploads the detected data in a special encrypted communication method to ensure that the DUC controller can collect high-precision data more stably.
Configure OTA download technology (Over-the-Air Technology) as a smart configuration option for the instrument.
The working status of the sensor can be queried, including reading the serial number of the sensor.
Specification Of Digital PH Meter
| Model | DUC2-COD-H-A |
| Software version | DRFN COD Analysis software V1.0 |
| Sensor input | Compatible with all DRFN's COD Digital Sensors |
| Display range | 0~1000mg/L |
| Resolution | 0.01mg/L |
| Relay control | 2 settable SPST relays with a maximum load of 3A/250VAC |
| Analog current output | 2 settable 0/4~20mA active current loop output with a maximum load of 1000 ohms |
| Communication method | Two-wire RS485 interface;communication protocol: MODBUS RTU;support JSON text data format |
| OTA | -- |
| Display screen | 128*64 black-and-white graphic lattice LCD, adjustable backlight mode, adjustable display rate |
| Configuration information | Power off protection, parameters are retained indefinitely |
| Time history/data record | Year/month/day/hour/min/second, record 14000 historical data, record interval can be set between 1~999 minutes |
| Maintenance records | Last 100 times |
| Protection level | IP66 |
| Operating environment | 0~60ºC,relative humidity less than 95% RH( no condensation) |
| Storage environment | -20~70ºC, less than 55% RH( no condensation, precision instruments) |
| Shell material | Enhanced ABS |
| Size | Instrument size 144*144*120 mm |
| Mounting method | Wall mounting, pipe clamping, panel installation (hole size 138*138 mm) |
| Electrical interface | The back end of the instrument reserved 3 M12*1.5 Gram head, line diameter 3~6.5 mm |
| Power supply | 100~240VAC |
| Power consumption | About 7W |
| Weight | About 800g |
){kind=link}