| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | DUC2-DO-A dissolved oxygen controller | DUC2-DO-D dissolved oxygen controller | |
| Sensor Input | Single channel input digital dissolved oxygen sensor for water | ||
| Display Range | DO | 0~50mg/L or 0~50ppm (measuring range related to the connected sensor) | |
| saturation | 0~500% (measuring range related to the connected sensor) | ||
| TEMP | -10~500ºC /14~932ºF (measuring range related to the connected sensor) | ||
| Resolution | DO | 0.01mg/L or 0.01ppm | |
| saturation | 0.1% (0≤saturation<10); 1% (10≤saturation≤500) | ||
| TEMP | 0.1ºC/ 0.1ºF | ||
| Relay Control | Two settable SPST relays, Max. Load 3A/250VAC Set high/low alarm, temperature and wash control |
||
| Current Output | Two settable 0/4~20mA current, Max. Load 1000Ω | ||
| Digital Output | Two-wire RS485 interface; MODBUS RTU | ||
| Display Screen | 128*64 3.2-inch large graphic dot matrix LCD | ||
| Configuration | Power off protection, parameters are retained indefinitely | ||
| Time and Data | Display year/month/day/hour/minute/second, record 10000 historical data | ||
| Maintenance Record | Last 100 times | ||
| Language | English | ||
| Protection Grade | IP66 | ||
| power failure protection | Setup data is permanently retained when power off | ||
| Operating Environment | 0~60ºC,RH<95% ( no condensation) | ||
| Storage Environment | -20~70ºC,RH<55% ( no condensation) | ||
| Enclosure Material | Enhanced ABS | ||
| Dimension | 144*144*120 mm (hole size 138*138 mm) | ||
| Installation | Wall mounting, pipe clamping, panel | ||
| Electrical Interface | Reserve three M12*1.5 gland heads, the wire diameter is 3~6.5mm | ||
| Power Supply | AC: 100~240V 50/60Hz | DC: 18~36V | |
| Power Consumption | About 24W | ||
| Weight | About 1600g | ||
Enhanced ABS materialHousing protection grade lP66
){kind=link}