Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model
|
APX1-C1Z | |
Principle | PH | Glass pH electrode (hydrogen ion concentration index) |
ORP | Platinum or gold electrodes (redox potential) | |
Display Range | PH | 0~14pH |
ORP | ±2000mV | |
Temp | -10~150ºC | |
Resolution | PH:0.01pH ORP:1mV TEMP:0.1ºC | |
Accuracy | 0.1% of the measuring range or ±0.02pH / ±2mV, take the larger one | |
Stability | 0.05% of measuring range every 24 hours without accumulation | |
Repeatability | Better than 0.1% of measuring range | |
Temp.Compensation | Automatic or manual (NTC10K/PT1000) | |
Relay Output | Two SPST relays, Max load 3A/250VAC, set high/low alarm, temp. or clean control | |
Digital Communication | A two-wire RS485 interface, Modbus RTU | |
Current Output | A 0/4~20mA current Max.load 1000Ω | |
Language | English | |
Display | 128*64 3.2-inch graphic dot matrix LCD | |
Calibration Method | PH:3 points ORP: 2 points | |
Protection Grade | IP66 | |
Enclosure Material | Enhanced ABS | |
Power Supply | AC:100~240V 50/60Hz or DC:18~36V | |
Dimension | 100*100*120mm (Hole size 92*92mm) | |
Electrical Interface | Reserve three M12*1.5 glan heads, the wire diameter is 3~6.5mm | |
Work Temperature | 0~60ºC, RH<95%, non-condensing | |
Storage Temperature | -20~70ºC, RH<55%, non-condensing | |
Installation | Panel | |
Weight | 450g | |
Power Consumption | Max.3W |